Login Router

Connect a phone or computer to the 5G router via Wi-Fi or Ethernet. And login to the router at the default router IP address 192.168.20.1.

Connect to Router

After connecting to the electrical outlet via the DC power adapter, the EZR24-5G router will boot up and turn on the Wi-Fi hotspots Cell-WiFi-xxxx-V4 and Cell-WiFi-xxxx-V5 in 2~3 minutes.

i. Wi-Fi Connection

The default Wi-Fi hotspot has no encryption. Connect to this Wi-Fi hotspot on a computer or mobile phone.

ii. LAN Connection

You can connect a computer to the LAN ports on the 5G router.

iii. IP Settings

The DHCP server is enabled on the 5G router.

DHCP dynamically assigns the IP address, gateway, domain name server, and other information to the connected devices. Below are the default DHCP settings.

Router Address (Gateway): 192.168.20.1 Subnet Mask: 255.255.255.0 (24) DHCP IP Pool: 192.168.20.100~254 DHCP Lease Time: 12 Hours

The terminal will automatically obtain the local IP address if turned on in DHCP client mode. If the terminal uses the static IP mode, please follow the guidance below to set up the IP address.

Configure TCP/IP on your connected devices, and make sure the IP address is within 192.168.20.100~249. The subnet mask should be 255.255.255.0. The router address should be 192.168.20.1.

On iPhone: Goes to Settings > Wi-Fi > Advanced On Android phone: Goes to Settings > WLAN > Advanced On Mac: Goes to System preferences > Network > Wi-Fi > Advanced > TCP/IP

On Windows:

Goes to Start > Control panel > Network and internet > Change adapter setting (on the left window panel) > Local area connection > Properties (right click) > TCP/IPv4 (Internet Protocol version 4) > Properties > General.

Choose Obtain an IP address automatically and Obtain DNS server address automatically Click OK to exit settings.

Click OK again in the Local area connection properties to apply the new configurations.

After connecting your smartphone or computer to the router, open a web browser and type http://192.168.20.1 in the URL address bar. Use default password 🔑root or admin to log in to the 5G router admin.

If unable to access router admin with 192.168.20.1, please clear your browser's cache or use the complete URL path below. 🔗http://192.168.20.1/cgi-bin/luci

The default URL prefix is http:// instead of https://.

Last updated 4 months ago