After connected to the electrical outlet, the EZR23 router will automatically turn on the power. After the router successfully boots up, you can join-in the Wi-Fi hotspot
Cellular-WiFi-xxxxxx. The last six characters are the Wi-Fi module's Mac address.
The default Wi-Fi hotspot has
no encryption. Connect to this Wi-Fi hotspot on a computer, laptop or smartphone.
You can also connect a computer to the LAN port on the 4G router. When connecting to a secondary router, make sure to connect to the WAN port on the secondary router.
The DHCP server is enabled on the EZR23 router. DHCP is used to dynamically assign the IP address, gateway, domain name server, and other information to the connected devices. Below are the default DHCP settings.
Router Address (Gateway):
DHCP IP Pool:
DHCP Lease Time:
If the DHCP function is activated on your device, it will automatically obtain the intranet IP and router IP addresses. Otherwise, you need to configure the IP addresses manually.
Configure TCP/IP on your connected devices, make sure IP address is within
192.168.20.100~249. The subnet mask should be
255.255.255.0. The router address should be
On iPhone: Goes to
On Android phone: Goes to
On Mac: Goes to
System preferences >
Control panel >
Network and internet >
Change adapter setting (on left window panel) >
Local area connection >
Properties (right click) >
TCP/IPv4 (Internet protocol version 4) >
Obtain an IP address automatically and
Obtain DNS server address automatically Click
OK to exit settings.
OK again in the
Local area connection properties to apply the new configurations.
After connected your smartphone or computer to the router, open a web browser and type
http://192.168.20.1 in the URL address bar. Use default password 🔑
admin to log in to the EZR23 router admin.